European motor-yacht marketPLENYouTubeFacebookInstagramSubscribe
RynekJachtów
Motor Yacht Market Daily
A compact yacht watermaker installation in a technical locker — AI illustrationAI illustration
Technology · On-board systems

Schenker Qube 150 ahead of METSTRADE. 12V does not remove the need for an energy calculation

Capt. Paweł Grot · Technology and operations · · 3 min read

Schenker Watermakers is due to present a new Qube 150 watermaker at METSTRADE. Daily Nautica reports a stated output of 150 litres per hour at 500W, with 12V, 24V and 48V DC options alongside 230V AC. PressMare also lists the Amsterdam presentation. Schenker’s official site confirms that Qube is its compact, energy-recovery range designed for battery power; the detailed specification for this new version still needs confirmation in the manufacturer’s final data sheet.

The essential caveat is that 150 l/h and 500W are figures reported in trade material, not results from an independent test aboard a particular yacht. Nor should “12V” be understood to mean that the unit is automatically a sensible fit for every 12-volt installation.

The system matters more than the wattage alone

If the 500W claim is confirmed, running current at 12V will still be material before voltage drop, filter operation, flushing and real charging efficiency are considered. The owner should calculate the water-production cycle alongside the battery bank, alternator, charger, solar input and the other loads present while at anchor.

A compact footprint is useful only if there is room for filters, hoses, valves, brine discharge and service access. Seawater conditions, intake-water quality and flushing frequency are likely to matter as much in use as rated output. Ask for limits on temperature and salinity, noise data and the winterisation procedure.

What should be in the specification

The order should include an electrical drawing with cable sizes and protection, space for pre-filters, and a plan for membranes and consumables. There should also be a clear answer on who handles warranty outside the home port and whether service parts are available in season.

The same discipline belongs in any technical upgrade, as covered in when a yacht refit makes sense. W Yachts can help prepare a question list, but the installer should approve selection and installation after surveying the individual yacht.

Sources

Tomasz Wrzesiński

Practical market intelligence for yacht buyers

One useful briefing a week. No spam and no recycled press releases — only what matters when buying, owning or selling a yacht.

We will send an email with a link to confirm your subscription.

Read next