Harken says it will bring two new lines for larger yachts to METSTRADE 2026: Moving Solutions and Superyacht Furling Systems. The former includes a 48V rotary actuator, a 48V linear actuator and a 24V E-Locking Pin. The latter is due to make its world premiere as a package of large-sail furling and tensioning equipment. For a motor-yacht owner, the more relevant development is the potential to electrify moving structures that have commonly relied on local hydraulics.
Harken lists fold-down balconies, swim platforms, beach-club doors, tender garages, gangways and boarding systems among the rotary actuator’s intended applications. The company specifies a 48V DC brushless motor, cycloidal gearbox, IP67 protection, electric brake, reverse-torque protection and a manual backup input. It says the electrical approach can reduce the local pumps, reservoirs, valves and hydraulic lines otherwise required.
Fewer hydraulic components do not make a simple retrofit
The approach may reduce hydraulic maintenance and potential leak points. It is not, however, a blanket reason to refit every yacht. A platform or balcony operates under defined loads and cycles; mounts, power supply, cable protection, control logic, service access and the emergency procedure all remain critical. A 48V rating or IP67 claim does not establish compatibility with an existing structure or certify a complete installation.
An owner considering a refit should request evidence for the particular moving mass, dynamic loads, duty cycle, power draw and warranty conditions. It is equally important to understand whether manual emergency operation remains accessible when the structure is shut or power is lost. Those answers matter more than a general claim that a component is compact.
What is actually new
Harken distinguishes Moving Solutions from other equipment heading to Amsterdam. Some items, including UniPower winches and deck hardware, were already shown in Genoa. The company describes its Superyacht Furling Systems as the world premiere, and those systems are for large sailing yachts only. Their specification should not be transferred to a motor-superyacht platform.
Any business case should include structure, parts availability and shipyard downtime. Our guide to the economics of yacht refit sets out the wider framework, while W Yachts can help turn it into an acceptance checklist.




